Dating fender amplifier
For years, serial numbers have been used in various locations on Fender instruments, such as the top of the neck plate, the front or back of the headstock and the back of the neck near the junction with the body.
Serial numbers were stamped on the back vibrato cover plate on early ’50s Stratocaster® guitars, and on the bridge plate between the pickup and the saddles on some Telecaster® guitars.
The chart below details Fender serial number schemes used from 1965 to 1976.
Neck-dating can be useful in determining the was produced, rather than the complete instrument.
Given the modular nature of Fender production techniques, an individual neck may have been produced in a given year, then stored for a period of time before being paired with a body to create a complete guitar, perhaps, for example, in the following year.
Notice that there is quite a bit of overlap in numbers and years.
The only way to try to narrow the date range of your specific instrument is to remove the neck and check the butt end of the neck heel for a production date, which may be stamped or written there (if you’re uncomfortable doing this yourself, please refer to an experienced professional guitar tech in your area). Serial numbering didn’t change immediately because instruments continued to be made using existing, tooling, parts and serial number schemes.
While there have been periods of dramatic change—such as the transition periods between the Leo Fender years and the CBS years or the transition between the CBS years and the current ownership—most models are generally feature-specific and do not change from year to year.Serial numbers are also helpful in determining an instrument’s production year.